Types of Plastic Cups for Cafes and Drink Shops

PLASTIC CUPS

When a cafe or drink shop asks us about types of plastic cups, they usually want a simple split, not a chemistry lesson. We make two plastics: PET and PP. Clear PET is the one we suggest for iced coffee, juice, bubble tea, smoothies and many desserts, because the drink shows through the wall. PP is the one we turn to for a frosted look, a 90 mm injection-molded cup, or a larger thermoformed size.

Unprinted PET and PP cups ship from stock at 1,000 pcs per size. Printed cups start at 5,000 pcs. Lids are matched to the rim in millimeters, not to the ounce label. This is how we usually walk a new buyer through the choice.

Types of plastic cups: clear PET cups with iced coffee and matcha drinks lined up on a table

THE TWO PLASTICS

Types of plastic cups we make: PET and PP

We get this kind of inquiry every week. A shop sends a photo of an iced latte and asks for “plastic cups.” That is a start, but it is not a spec. The drink, the look they want, and the rim they need to lid all come first.

PET is the clear cold-drink cup. We do not treat it as a hot-fill cup, and we will say that up front. PP is a different plastic. It comes in a clear or frosted finish in our injection-molded line, and we also thermoform PP in a wider size range. If a buyer asks about a hotter fill in PP, it depends on the exact cup, the temperature and how you test it. We do not sign off on that until that work is done.

If your menu is mixed, you may need more than one of these types of plastic cups. Keep the rims consistent where you can, so the lids are easier to stock.

PET CUPS

Clear PET, when the drink should show

When a drink looks good in the cup, we usually suggest clear PET. Iced coffee, fruit tea, bubble tea, smoothies and many desserts show through the wall. That is why a lot of the “plastic coffee cups” you see in shops are PET.

We make 47 PET models, from 5.5 oz (150 ml) to 32 oz (1,000 ml), with rims from 74 mm to 117 mm. Most are straight-wall. There is also a U-shaped 89 mm series, and a 117 mm wide-mouth series that drink and dessert shops use when they want a wider opening.

12 oz and 16 oz are the sizes cafes ask for most. Those labels exist on more than one rim, which is why a 16 oz lid from one cup will not automatically fit another 16 oz cup. Check the rim in millimeters. The range is on our plastic cup sizes page.

Unprinted PET cups are in stock from 1,000 pcs per size. All PET cups can be printed, up to 6-color UV, from 5,000 pcs. Lead time is usually 18 to 25 days after artwork, specs and order terms are confirmed.

If iced coffee is the main drink, start with plastic coffee cups. Layered drinks often go in bubble tea cups, and wider or shorter cups in plastic dessert cups. For a clear wall on any cold drink, see clear plastic cups or the main plastic cups page.

Clear PET plastic cups with dome lids, filled with layered matcha drinks and boba
Clear and frosted PP plastic cups with black lids, two types of plastic cups in the PP line

PP CUPS

When we suggest PP instead

PP is the other plastic we run every day. The injection-molded line is all 90 mm: 360 ml, 500 ml and 700 ml, each in a clear or frosted finish. The frosted cups are only in this injection-molded series. Shops that want a softer, matte look often pick these.

Lids for the 90 mm cups include a one-piece leak-resistant lid with a spout, a lid with a red plug, and a flip coffee lid. A 90 mm mark on the lid does not mean every lid will fit every 90 mm cup in every filling condition. Confirm the pair before you order in bulk.

We also thermoform PP cups, 17 models from 250 ml up to 970 ml. The larger 970 ml cups, with 118 mm or 105 mm rims, are the ones fruit-tea shops often ask about for a big share.

If you are deciding between a clear PET cup and PP cups for a cold drink, tell us how you want it to look and we will suggest a model.

LIDS

Lids follow the rim, not the ounce size

This is the part that causes the most trouble, and it is simple: match the lid to the rim diameter in millimeters.

PET lids come as flat, dome, high and sip-through styles, in rims from 78 mm to 117 mm. Flat and dome lids cover most rims. High lids and sip-through lids are only offered on some rims. A dome lid leaves space above the rim for whipped cream or a topping, which is why dessert cups so often ship with a dome.

One more point: every Jorange flat lid has a hole. If you need a straw or a sip opening, say so in the quote and we will match the lid to the cup. The pairing notes are on our plastic cups with lids page.

Clear PET dessert cups with dome lids, filled with layered desserts

ORDERING

What we need for a clean quote

You do not need a perfect spec sheet to start. Send what you know about the types of plastic cups you need, and we will fill in the rim and lid.

Unprinted PET and PP

In stock from 1,000 pcs per size.

Printed plastic cups

From 5,000 pcs. All PET cups, and selected PP cups, support up to 6-color UV printing, with a proof before production.

Hot drinks

For hot coffee or tea, we usually start with paper cups, not PET. Standard paper cups start at 5,000 pcs.

For PET and PP cups, lead time is usually 18 to 25 days after artwork, specs and order terms are confirmed. Stock samples may be free; you cover freight. Printed samples have a sampling fee, agreed before we start.

We are a factory in Dongguan, and we reply within 24 hours. Send the cup type, the size in oz or ml or the rim in millimeters, the quantity, whether you need printing and a logo file, whether you need lids, and the destination country. Use the request a quote form, email info@jorangepack.com, or message WhatsApp +86 136 6983 5468. How to order and request samples walk through the steps if you are new to this.

A 16 oz label is not a lid size. Put the rim in millimeters on the quote if you already have it, and we will match the lid from there.

FAQ

Frequently asked questions

Can I use PET cups for hot coffee?

No. Standard clear PET cups are for cold drinks such as iced coffee, juice, bubble tea and smoothies. For hot coffee or tea, we recommend paper cups. We do not treat PET as a hot-fill cup.

What is the difference between PET and PP cups?

PET is the clear cup we usually suggest when you want the drink to show, for iced coffee, juice, bubble tea, smoothies and many desserts. PP is the other plastic we run every day. Our injection-molded PP cups are all 90 mm, in 360 ml, 500 ml or 700 ml, in a clear or frosted finish. We also thermoform PP cups, including larger 970 ml sizes. We do not confirm PP for hot fill unless the exact cup and filling conditions have been tested.

How do I match a lid to a plastic cup?

Match the lid to the cup’s rim diameter in millimeters, not to the ounce size. The same ounce label can sit on more than one rim, so a 16 oz lid from one cup will not automatically fit another 16 oz cup. For PET, flat and dome lids cover most rims; high lids and sip-through lids are only offered on some rims. Every Jorange flat lid has a hole.

What is the minimum order for unprinted and printed cups?

Unprinted PET and PP cups are in stock from 1,000 pcs per size. Custom-printed PET cups, and selected PP cups, start at 5,000 pcs, with up to 6-color UV printing. Standard paper cups also start at 5,000 pcs.

What should I send to get a wholesale cup quote?

Send the cup type, the size in oz or ml or the rim in millimeters, the quantity, whether you need printing and a logo file, whether you need lids, and the destination country. We reply within 24 hours.

GET A QUOTE

Tell us the drink, and we will match the cup

Send your cup type, size or rim, quantity and destination. We reply within 24 hours with a factory quote from Dongguan.

Similar Posts